Fujitsu ETERNUS Manual page 8

Chapter 1 Workflow
>
P3AM-4182-03ENZ0 Server Connection Guide (iSCSI) for Oracle Solaris
Install the iSCSI Software Initiator and Set Up the Server
Set up the OS to connect to the ETERNUS Disk storage system.
Refer
-
"Chapter 7 Installing the iSCSI Software Initiator and Setting Up the Server" (page 15)
Set the Server to Recognize the Logical Units
Set up the server so that it can recognize the ETERNUS Disk storage system logical units
(LUN).
Refer
-
"8.2 Logical Unit Recognition" (page 23)
Configure the System
Set up the server as required by the system configuration.
Refer
-
Set the multipaths.
•
"9.1 Enabling MPxIO" (page 24)
-
Set a file system.
•
"Chapter 10 Creating a File System" (page 26)
8
Copyright 2010 FUJITSU LIMITED