Ha Gain; Input Port; Phantom Power; Phase - Yamaha M7CL StageMix V3.0 User Manual

Yamaha Commercial Audio
4.7

HA GAIN

The gain for each input channel can be controlled using the faders in
StageMix. Press the [HA GAIN] button in the lower left area of the Mixer
window to enter HA GAIN mode. This button will turn red and the background
behind the channel faders will become red to indicate that StageMix is in HA
Gain control mode.
Note: the [HA GAIN] button will only appear when a bank of Input Channels
are selected since there are no Gain parameters for Output Channels.
Faders can be moved to change the HA Gain for each channel. The gain
value of each head amp will be displayed above the fader while any fader cap
is being touched. Up to 8 faders can be adjusted simultaneously.
Faders will only appear for channels that have a head amp available.

4.7.1 Input Port

When HA GAIN mode is active, the input port assigned to each channel
will be displayed at the top of each channel strip (EQ and Pan are not
displayed when HA GAIN mode is active). Input Port is a display-only
parameter and cannot be edited from StageMix.

4.7.2 Phantom Power

The 48V phantom power status for each input channel is also displayed
at the top of each channel strip when HA GAIN mode is active. The
48V indicator will appear in red when phantom power is active.
Phantom Power status is display-only and cannot be edited from
StageMix.

4.7.3 Phase

M7CL StageMix V3.0 User Guide
Page 12