Select A Mixer And Begin Working; Edit Mixer Configurations - Yamaha M7CL StageMix V3.0 User Manual

Yamaha Commercial Audio

3.3.3 Select a Mixer and Begin Working

If your iPad has been configured to work with an M7CL console, select the
mixer from the list and press [CONNECT]. (The model of mixer (M7CL-48 or
M7CL-32) will appear in smaller text below the mixer's name.)
The message "Syncing With M7CL..." will appear while StageMix is obtaining
parameters from the console. After this process is complete, the Mixer window
will appear and StageMix is ready to be used.
If StageMix cannot connect with your M7CL console, refer to the
Troubleshooting section (9.0) at the end of this document for possible
solutions.

3.3.4 Edit Mixer Configurations

The parameters of a saved Mixer Configuration can be viewed and edited by
tapping the right arrow button next to a mixer's name. This will open the Edit
Mixer screen which allows the Name, IP Address and MAC Address to be
verified and edited using the procedures described in section 3.3.2. After
editing, press [SAVE MIXER] to save any changes.
M7CL StageMix V3.0 User Guide
Page 8