Access Point Mode; Wireless Settings - D-Link DAP-1155 User Manual

Section 3 - Configuration
Enable Wireless:
Check the box to enable the wireless function. If you do
not want to use wireless, uncheck the box to disable all
the wireless functions.
Wireless Mode: Selec Access Point fron the drop-down menu
Wireless Network When you are browsing for available wireless networks,
Name:
this is the name that will appear in the list (unless Visibility
Status is set to Invisible, see below). This name is also
referred to as the SSID. For security purposes, it is highly
recommended to change from the default network name.
802.11 mode: 802.11n Only - Select only if all of your wireless clients
are 802.11n.
Mixed 802.11n and 802.11g - Select if you are using both
802.11n and 802.11g wireless clients.
Mixed 802.11n, 802.11g, and 802.11b - Select if you are
using 802.11n, 802.11g, and 802.11b wireless clients.
Enable Auto The Auto Channel Scan setting can be selected to allow
Channel Scan: the DAP-1155 to choose the channel with the least amount
of interference.
Wireless Channel:
Indicates the channel setting for the DAP-1155. If you enable Auto Channel Scan, this option will be grayed out.
Channel Width: Select the Channel Width:
Auto 20/40 - Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
D-Link DAP-1155 User Manual

Access Point Mode

Wireless Settings

21