Electrolux AW 445 Operating Instruction page 12

PREPARATION FOR USE
For models equipped with parking brake: press
pedal A to engage the brake.
Press pedal B to disingage it.
Drop the brushes roughly side by side in front of
the machine; the actual position does not matter.
Switch the machine on by turning the key switch a
quarter of turn clockwise. Wait momentarily until
the multifunction display lights showing the
battery voltage.
10
B
A
ON
OFF
SCRUBBING AND DRYING OPERATION
Drive the machine forward by holding the hand-
grips, then rolling the thumb wheels forward until
the machine moves.
In the event of a temporary stop (releasing thumb
wheels) the automatic switch-off of the all functions
will occur (AUTOPOWER-OFF).
Turn the thumb wheels in order to restart the
normal operation; all the functions will restart
automatically
(AUTOPOWER-ON).
NOTE: for all versions of model AW445 and
(brush driven model) the rotation of the brush will
make the forward displacement of the machine
easyer. On the same model the "AUTOPOWER-
OFF"/"AUTOPOWER-ON" function is not
available.
The following adjustments can be done on the
machine: increase or reduction of the pressure of
the brushes on the floor by means of the
dedicated rotating knob: the required pressure
will depend on the kind of floor and dirt to be
scrubbed.
NOTE: Set the pressure to the minimum possible
value, consistantly with the kind of dirt to be
cleaned: this will increase the battery working
time.
Increase or reduce of the pressure of the
squeegee on the floor by means of the dedicated
knob: again the required pressure will be different
depending on the kind of floor to be dryed.
15