Refusing Incoming Calls (Do Not Disturb [Dnd]) - Panasonic KX-NCP500 User Manual

1.8.2 Refusing Incoming Calls (Do Not Disturb [DND])

–
Do Not Disturb (DND)
–
Switching FWD/DND Status Using Fixed FWD/DND Button
Do Not Disturb (DND)
You can set this feature to prevent incoming calls from ringing at your extension. This can be useful, for
example, when you are in a meeting or busy.
To set/cancel
PT/SLT/PS/SIP Extn.
Off-hook.
•
When using a proprietary telephone, you can set or cancel Do Not Disturb by pressing the
FWD/DND button (fixed button) instead of " 710".
•
The FWD/DND button light shows the current status as follows:
Off: Both features are not set.
Red on: FWD mode
Flashing red slowly: DND mode
•
The system has two modes: (1) FWD/DND Cycle Switch Mode and (2) FWD/DND Setting
Mode. Ask your manager what mode your system is in if you are not sure.
(1) When in FWD/DND Cycle Switch Mode:
Pressing the FWD/DND button (fixed button) while in idle status will cycle the setting as shown
below:
(2) When in FWD/DND Setting Mode:
Pressing the FWD/DND button (fixed button) while in idle status allows you to switch the
FWD/DND status and set the FWD destination (refer to "
Using Fixed FWD/DND Button").
Note
7 1
Enter 71. Enter 0 to 2 as you desire.
FWD DND
A FWD/DND button (customised button) is always in FWD/DND Cycle Switch Mode: the
mode cannot be changed.
1.8.2 Refusing Incoming Calls (Do Not Disturb [DND])
0 Both Calls
OR
1 Outside Calls
OR
Intercom Calls
2
Off
1
Set
OR
C.Tone
0
Cancel
Enter 1 to set
or 0 to cancel.
Switching FWD/DND Status
On-hook.
User Manual 129