Panasonic KX-NCP500 User Manual page 175

•
The following PSs can display incoming call log information from other extensions (including
TIE) with same information as a PT connected to the PBX.
–
KX-TCA185/KX-TCA285/KX-TCA385
•
PSs other than these may not display the same incoming call log information as a PT
connected to the PBX.
•
For details about referencing the incoming call log using the PS's navigator key, refer to the
PS's documentation.
*1 Incoming calls from extensions can be recorded to the incoming call log, depending on system programming. For more information,
consult your System Administrator or System Manager.
To clear the log information
Display PT
While confirming the log information
(Call Log)
OR
Press Call Log, or Up or Down
until desired party appears.
To call
Display PT
While confirming the log information
(Call Log)
OR
Press Call Log, or Up or Down
until desired party appears.
To store the caller's information in personal speed dialling
Display PT
While confirming the log information
(Call Log)
OR
Press Call Log, or Up or Down
until desired party appears.
TRANSFER
Press TRANSFER.
Off-hook.
AUTO DIAL
STORE
Press STORE.
1.13.1 Using the Call Log
User Manual 175