Table of Contents
Advertisement
Helpful Advice Before Installation
Please retain all packaging until you have checked and counted all the parts and other
•
package contents.
It is recommended to place your fireplace near an existing outlet, for ease of electric
•
connection.
Store your fireplace in a dry, safe and dust-free place while drilling, for fireplace
•
installation.
Do not attempt to wire new outlets or circuits. To reduce the risk of fire, electric shock or
•
injury to persons, always have a licensed electrician perform maintenance and other
repairs.
Operating Instructions
Visually inspect the unit for any damages before operation.
fireplace if any
damages are detected. Contact your dealer immediately.
1) Plug the power cord into a conventional 120V 15 amp outlet and turn the MASTER POWER
switch on the rear panel of the portable fireplace. Then push the POWER button on the front
control panel or on the remote to turn the unit on. The LED display will show the default value as
0
0
72
F/22
C.
NOTE: "UP" and "DOWN" arrow buttons on the control panel and remote control have
dual function capabilities.
Adjust TIME / TEMP with up arrow or adjust HI / LOW settings.
Adjust TIME / TEMP with down arrow or adjust
4
Do not operate the
0
0
C/
F settings.
Function Display
Advertisement
Table of Contents
