Table of Contents
Advertisement
3)
Again, the default set temperature displayed on the LED display is 72
button, the LED display will switch to the temperature status and flash. You must press the
HI/LOW/UP button or
temperature. Each time you press the HI/LOW/UP button, the temperature setting will increase
0
by 1
F. Press the
temperature setting is 86
(2) seconds, the number rotation will cycle more quickly.
4)
Press the HI/LOW/UP button to switch from HI (rated at 1500W) to LOW (rated at 750W). The
default setting is HI.
To view the ambient room temperature on the display instead of the set
5)
temperature, push the Time button and while holding, push the Temperature
button and then release.
6)
Enjoy simulated flame function; turn the Flame knob to adjust brightness.
0
0
C/
F/DOWN button once again within (5) seconds to set the desired
0
0
C/
F/DOWN button and the temperature will decrease by 1
0
0
F (30
F). If you hold the HI/LOW/UP button or
Press TEMP to switch
to temperature status,
then press HI/LOW/UP
button once within 5
seconds to scroll up
From HI to LOW
6
0
F. By pressing the TEMP
0
F. The maximum
0
0
C/
F/DOWN button for
Advertisement
Table of Contents
