Whirlpool  furnace User Instructions
Hide thumbs Also See for Whirlpool furnace:

Advertisement

GAS FURNACE USER INSTRUCTIONS
GAS FURNACE SAFETY................................................................1
GAS FURNACE OPERATION ........................................................4
Light Furnace ...............................................................................4
Shut Down....................................................................................5
Adjust Controls.............................................................................5
WARNING:
FIRE OR EXPLOSION HAZARD
Failure to follow safety warnings exactly could result in serious injury, death or property
damage.
- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or
any other appliance.
- WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any phone in your building.
• Leave the building immediately.
• Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's
instructions.
• If you cannot reach your gas supplier, call the fire department.
- Installation and service must be performed by a qualified installer, service agency or the gas
supplier.
To the installer: leave this manual
with the furnace.
To the consumer: read all
instructions in this manual. Keep
all manuals for future reference.
46877B008

Table of Contents

GAS FURNACE MAINTENANCE...................................................5
TROUBLESHOOTING ....................................................................8
ASSISTANCE OR SERVICE ...........................................................8
WARRANTY ....................................................................................9

GAS FURNACE SAFETY

Whirlpool
®
Home Cooling and Heating
14610 Breakers Drive
Jacksonville, Florida 32258
Filter Maintenance ........................................................................6
Replacement Parts.......................................................................8

Advertisement

Table of Contents
loading

Summary of Contents for Whirlpool Whirlpool furnace

  • Page 1: Table Of Contents

    — Installation and service must be performed by a qualified installer, service agency or the gas supplier. To the installer: leave this manual with the furnace. To the consumer: read all Whirlpool ® Home Cooling and Heating instructions in this manual. Keep 14610 Breakers Drive all manuals for future reference.
  • Page 2 Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER”...
  • Page 3: Save These Instructions

    IMPORTANT SAFETY INSTRUCTIONS The furnace area must be kept clear and free of Examine the furnace installation at least once a year combustible materials, gasoline, and other flammable to determine that: vapors and liquids. – All flue gas carrying areas external to the furnace, Insulating materials may be combustible.
  • Page 4: Gas Furnace Operation

    GAS FURNACE OPERATION There are many types and styles of thermostats. Your thermostat Thermostat Control may look different from the one shown, depending on the type of thermostat and whether cooling was installed with the system. However, almost all thermostats perform the same basic functions.
  • Page 5: Shut Down

    Shut Down 1. Set the thermostat control(s) to the lowest setting (see 3. Remove the burner access panel (on some models). Thermostat Control graphic). 4. Turn off the gas supply at the manual gas control valve. 2. Disconnect power. 5. Replace the burner access panel (on some models). Adjust Controls Turn System On or Off Operate Fan...
  • Page 6: Filter Maintenance

    Your gas furnace is designed to give many years of efficient, Distorted flame or yellow tipping on Natural gas flames, or long, satisfactory service. There are routine maintenance steps you yellow tips on propane flames, may be caused by lint or dirt should take to keep your furnace operating efficiently.
  • Page 7 Minimum Filter Requirements Filter Location The Airflow Descriptor is the 2 digits immediately preceding The filter on your furnace will be located in one of several places the hyphen (-) in the furnace model number. The model on the unit, depending on which furnace style you own. See the number is located on the rating plate inside the access panel.
  • Page 8: Troubleshooting

    Please include a daytime phone number in your correspondence. Blower housing assembly Blower motor mount Replacement Parts Blower wheel Capacitor Blower motor To order replacement parts contact your Whirlpool ® Home Cooling and Heating dealer. Inducer Group Gas Control Group Pressure switch...
  • Page 9: Warranty

    (20) years. Lifetime coverage under the limited lifetime heat exchanger warranty is subject to proof of purchase and is not transferable. All terms of this warranty must be followed. Heat Exchanger Availability: If a replacement heat exchanger is no longer available for a unit covered by this warranty, Whirlpool ®...
  • Page 10 (includes damages caused by brownouts) ® c) Modification, change or alteration of the equipment, except as directed in writing by Whirlpool Home Cooling and Heating d) Operation with system components (indoor unit, outdoor unit and refrigerant control devices) which do not match or meet the specifications recommended by Whirlpool ®...
  • Page 11 Notes...
  • Page 12 46877B008 ®Registered Trademark/TM Trademark of Whirlpool, U.S.A., 4/08 © 2008. All rights reserved. Manufactured under license by Tradewinds Distributing Company, LLC., Coconut Grove, Florida Printed in U.S.A.

Table of Contents