Table of Contents
Advertisement
ELECTRICAL FEEDER CABLE CONNECTION
WARNING: The power supply cable must be connected only by an authorised servi-
ce agent in order to avoid a hazard.
If the power supply cable is damaged, it must be replaced only by an authorised
service agent in order to avoid a hazard.
To connect the feeder cable to the cooker it is necessary to:
•
Remove the 2 screws that hold shield "A" behind the cooker .
•
Open completely the cable clamp "D" .
•
Insert the feeder cable into the cable save "P" . The supply cable must be of a suita-
ble size for the current requirements of the appliance; see the section "Feeder cable
specifications".
•
Connect the phase, neutral and earth cables to terminal "B" according to figures 11.1
and 11 .2 .
•
Pull the feeder cable and block it with the cable clamp "D" .
•
Re-mount shield "A" .
Note: The earth conductor must be left about 3 cm longer than the others.
POWER SUPPLY
230 V~ 50 Hz
FEEDER CABLE SPECIFICATIONS
Type "H05RR-F"
3 x 2,5 mm
2
B
D
38
4680 W
P
230 V
A
PE
N
L
L
N
PE
1
(L
)
2
230 V
PE
N
L
L
N
PE
1
(L
)
2
Earth
Neutral
Live
Fig . 11 .1
Hide quick links:
Advertisement
Table of Contents
