Note For The Replacing Of Memory Ic - Toshiba MV13K1 Service Manual

If a service repair is undertaken where it has been required to change the MEMORY IC, the following steps should be taken to
ensure correct data settings while making reference to TABLE 1.
NOTE: Initial Data setting will not be possible if clock has been set. To reset clock, either unplug AC cord and allow
at least 5 seconds before Power On.
ADDRESS
00
01
02
03
04
05
06
07
08
09
Enter DATA SET mode by setting VOLUME to minimum.
1.
While holding down VOLUME button on front cabinet, press key 6 on remote control simultaneously.
2.
ADDRESS and DATA should appear as FIG 1.
3.
4. ADDRESS is now selected and should "blink". Using the SET + or - keys on the remote, step through the ADDRESS until
required ADDRESS to be changed is reached.
5. Press ENTER to select DATA. When DATA is selected, it will "blink".
6. Again, step through the DATA using SET + or - until required DATA value has been selected.
7. Pressing ENTER will take you back to ADDRESS for further selection if necessary.
8. Repeat steps 4 to 7 until all data has been checked.
9. When satisfied correct DATA has been entered, turn POWER off (return to STANDBY MODE) to finish DATA input.
The unit will now have the correct DATA for the new MEMORY IC.

NOTE FOR THE REPLACING OF MEMORY IC

DATA ADDRESS DATA
81 0A 2B
6D 0B 24
07 0C 0A
00 0D 08
00 0E 05
00 0F 07
C4 10 6C
8B 11 2B
11 12 21
16 13
15
ADDRESS DATA ADDRESS
14 00
15 A0
16 61
17 54
18 B9
19 0F
1A 08
1B 82
1C 6A
1D FA
Table 1
ADDRESS DATA
INIT 00 83
0010
POWER ON
0003
PLAY/REC
Fig. 1
DATA ADDRESS
1E 43 28
1F 05 29
20 0D
21 0A
22 32
23 00
24 39
25 00
26 00
27 35
DATA
00
02