Clock Setting - Kenwood K23CM13 Instruction Manual

clock setting

When the microwave is connected to the mains power, the LED display will show "0:00" and the
microwave will sound once. Please ensure that you have set the clock prior to use.
Please follow the steps below to set the clock.
1. Press the Clock/Kitchen Timer button and
the hour digits will flash.
2. Press the /
digits. The input time has to be within 0-23.
3. Press the Clock/Kitchen Timer button and
the minute digits will flash.
4. Press the /
minute digits. The input time has to be
within 0-59.
5. Press the Clock/Kitchen Timer button
again to complete the clock setting. ":" will
start flashing. The clock setting is complete.
• This is a 24-hour clock. When the
microwave is connected to the mains
power for the first time or when the
power is resumed after a power
interruption, the LED display will show
"0:00". To re-set the clock, follow the
above 5 steps.
• In the process of clock setting, if the
Stop button is pressed or if there is
no operation within 5 minutes, the
microwave will go back to the previous
status automatically.
• To find out the current time while the
microwave is operating, press the
Clock/Kitchen Timer button. It will
last for 2-3 seconds and then return to
its original display.
K23CM13_IB_RC_131230_Michelle.indd 19
buttons to adjust the hour
buttons to adjust the
1, 3, 5
2, 4
19
10/01/2014 12:14 PM