Panasonic KX-T0155 Quick Installation Manual page 28

7 Connecting a Cell Station to the PBX
DLC8
Port No.
Port No.
8
1
7
6
5
2
4
3
2
3
1
4
5
6
:
Accessories and User-supplied Items for the CS
Accessories (included): Screws ´ 2, Washers ´ 2
User-supplied (not included): RJ45 connector
Note
•
The no. 3, 4, 5 and 6 pins (Master) of the CS must be connected to 2 pairs of pins on the Super
Hybrid Ports or HLC4/DLC4/DLC8 card. Then use 4 consecutive pairs of pins on the Super Hybrid
Ports or HLC4/DLC4/DLC8 card, starting with the pins corresponding to the Master, as in the
example above.
•
When connecting multiple KX-T0158 CSs to a DLC8 card, make sure that the no. 3, 4, 5 and 6 pins
(Master) of adjacent CSs are at least 2 pairs of pins away on the card.
•
For details about the Super Hybrid Port or HLC4/DLC4/DLC8 card, refer to the Installation Manual
for your PBX.
•
CS connections must be made within the Super Hybrid Ports or the same HLC4/DLC4/DLC8 card.
•
When a wrong connection is made, satisfactory performance of the CS cannot be guaranteed.
Check the connection of CS and the PBX using the Maintenance Console. For information about
how to view CS information using the Maintenance Console, refer to "Utility—CS Information" in
the PC Programming Manual for your PBX.
28 Quick Installation Guide
DLC8 card (RJ11)
Signal Name Pin No.
D1 1
2
3
D2 4
1
D1
2
3
D2
4
D1 1
2
3
D2 4
D1 1
2
3
D2
4
D1 1
2
3
D2
4
1
D1
2
3
D2 4
: :
CS 1 (RJ45)
Signal Name Pin No.
D1C 1
D2C
2
D1B
3
4
D1A
D2A 5
D2B 6
D1D 7
D2D 8
CS 2 (RJ45)
Signal Name Pin No.
D1C 1
D2C
2
D1B
3
4
D1A
D2A 5
D2B 6
D1D 7
D2D 8
Document Version 2009-12
Master
Master