Preparing For Operation; Optipoint 410/420 Economy/Economy Plus/Standard/Advance - Siemens HiPath 2000 Administration Manual

Step by Step
01=Configuration?

Preparing for Operation

For the optiPoint 410/420 economy/economy plus/
standard/advance, follow the sequence described
below. The sequence for the optiPoint 410 entry is
described from
The startup process sequence describes a
standard case of configuration. Network
configurations that deviate from the standard
case may require additional entries.
optiPoint 410/420 economy/economy plus/
standard/advance
If problems are encountered during the initial startup or
if you have queries on individual specifications, the
following chapters will be of help:
• For specialized information on the administration of
the optiPoint 410/420, see „Alphabetical
Reference"
• For descriptions of different configuration-related
situations, see „Administration Scenarios"
Page 102.
• For error messages on the display of the
optiPoint 410/420, see „Error Messages"
Page 37.
Entering the Administration Area
:
Confirm to open the Configuration menu.
>
o
Enter the Administrator password
(default: 123456).
:
Confirm.
Setting Up the Telephone
Page 17.
Page 68.
15