Siemens HiPath 2000 Administration Manual page 48

Administration
Step by Step
48
Set User Language
Proceed as follows to change the user language of your
optiPoint application module:
Open the "System settings" page
s
Select the "Language" tab.
qc
Select the required language and confirm.
Confirm the query by clicking the "Yes" softkey.
Yes
The optiPoint application module is restarted and the
interface is displayed in the changed language.
By selecting the "Automatic" setting, the
optiPoint application module applies the
language setting of the connected phone.
Select Keypad Assignment
Proceed as follows to change the keypad assignment of
your optiPoint application module:
Open the "System settings" page
s
Select the "Keypad" tab.
qc
Select the required assignment (QUERTY -
international, QUERTZ - German) and confirm the
selection.
Confirm the query by clicking the "Yes" softkey.
Yes
The optiPoint application module is then restarted; the
keys are assigned according to the selected setting.
Page 48.
Page 48.