3.1 Trunk Programming of the Hybrid IP-PBX
3.1
Trunk Programming of the Hybrid IP-PBX
In order to assign Trunk Group Number to the IP trunk of the Hybrid IP-PBX, follow the
procedure below.
Note
It is assumed that you have already installed the PC Programming Software in your PC.
16
Getting Started
Pending
1. Double-click "TDA PC Programming" icon.
2. Type the password, then click [OK] to log-in.
3. Select "File"
"New".
4. Double-click "Slot" under "Configuration".
5. Select "IP-GW4" for "Card Type" for the
appropriate Slot, then click [OK].
6. Double-click "CO" under "Line".