Panasonic KX-TDA0480 Getting Started Manual page 31

Presetting Fax Protocol
Setting Other Data
To configure the following parameters, please refer to 4.9.1 Configure Gateway Units (KX-
TDA0480) of IP Gateway Card Installation Manual.
• Trunk priority
• Voice mode
• Network
• Call Control
• SNMP
• Recovery delay
• Notify e-mail
• Priority routing information
4.4 Configuring Office Data
a.
Click the "FAX related" tab.
b.
Select "TCP" (default) or "UDP", then click
[OK].
a.
Click the "Other" tab.
b.
Select "A-law" or "m-law" (default) for "A-
law/m-law flag"depending on the area in
which the IP Gateway Card is used, then
click [OK].
Getting Started 31