Table of Contents
Advertisement
1
To assure safety, make sure all units are turned off before making any connections.
2
Use the USB cable to connect the camcorder to the PC.
We recommend that you use the AC Adapter.
NOTES:
When the USB cable is connected, turning on or off the camcorder or switching the VIDEO/MEMORY
(DSC) mode on the camcorder causes malfunctions of the PC.
If you connect the camcorder to the PC through a USB hub, compatibility issues between the hub and the
PC may result in instability in the operation of the PC. If this happens, connect the camcorder directly to the
PC, not through the hub.
Do not use an extension USB cable.
Software Installation (Macintosh)
Follow the procedure described below to install the software.
Quit any other software you are using.
1
Load the provided CD-ROM into the PC. Double click the CD-ROM icon.
2
Double-click the [ImageMixer] folder in the CD-ROM.
3
Double-click the [Install ImageMixer with VCD] icon.
The installer starts up. Follow the instructions which appear on the screen.
NOTE:
The ImageMixer with VCD instruction manual is included on the CD-ROM in PDF format. Double-click
the [Docs] folder. Open the "Start.pdf" file and click the button of the desired language. Note that Adobe
®
Acrobat
Reader must be installed to read PDF files. The Installer of Adobe
within the [Reader] folder on the CD-ROM.
Viewing the Contents of a Memory Card (Macintosh)
1
Connect the camcorder to the PC with a USB cable. (
2
Make sure that there is a memory card in the camcorder.
3
Set the camcorder to the memory card playback mode.
Refer to the camcorder's instruction manual for details.
[USB MODE] appears on the camcorder's LCD monitor. The memory card icon appears on the desktop.
The name of the memory card icon is "untitled". We recommend that you name the icon to
tell it from the other removable disks or folders.
pg. 13)
— 14 —
®
®
Acrobat
Reader is included
CONTINUED ON NEXT PAGE
®
Advertisement
Table of Contents
