Connections (Windows ® ) - JVC LYT1085-001A Installation And Connection Manual

6
Load the provided CD-ROM in the PC. Install [USB Mass Storage Class driver]. (
7
Use the USB cable to connect the camcorder to the PC.
Device driver is installed.
8
Confirm the [Removable Disk] icon is displayed in [My Computer].
Installing [USB Video Streaming driver]
1
Use the USB cable to connect the camcorder to the PC. (
2
Select [Start] – [Settings] – [Control Panel]. Double click the [System] icon.
3
®
Windows 98/98SE/Me: Select the [Device Manager] tab.
®
Windows 2000/XP: Select the [Hardware] tab and click [Device Manager].
4
Delete [GR-DVP9*] in [Other devices].
* The model name depends on the connected camcorder.
5
Disconnect the USB cable from the camcorder. Restart the PC.
6
Load the provided CD-ROM in the PC. Install [USB Video Streaming driver]. (
®
Windows XP: Refer to "Installing USB Video Streaming driver for Windows
installation.
7
Use the USB cable to connect the camcorder to the PC.
Device driver is installed.
®
Windows 2000: When a warning message dialog box on digital signature appears, click [OK] to
continue installation.
8
Confirm the following devices are displayed in [Device Manager] by performing steps 2 – 3.
[JVC PIX-MCV Video Capture] in [Imaging Devices]
[JVC PIX-MCV Audio Capture] in [Sound, video and game controllers]
[JVC Composite PIX-MCV Device] and [JVC Communication PIX-MCV Video Driver] in [Universal
Serial Bus Controllers]
Connections (Windows
Connecting the USB cable
Connect the USB cable to copy still image and video clip files in a memory card to the PC or to use
ImageMixer in capturing video.
Camcorder
1
To assure safety, make sure all units are turned off before making any connections.
2
Use the USB cable to connect the camcorder to the PC.
We recommend that you use the AC Adapter.
®
)
To USB connector
USB cable
— 9 —
pg. 9)
®
XP users" (
To USB connector
CONTINUED ON NEXT PAGE
pg. 5)
pg. 5)
pg. 8) for
PC