Troubleshooting - JVC Blank Media LYT1015 Instructions Manual

20
EN
®
Windows
SYMPTOM
Although the USB cable is
connected, PC operating
system does not recognize the
memory card in the
camcorder.
Cannot copy or save files.
The colors displayed on the PC
are odd.
NOTE:
When using a laptop PC, operation may be interrupted by a warning when the battery is nearly exhausted.
If there is software which monitors the status of the battery running in the [StartUp] folder...
Close the application, or delete/move its icon from the [StartUp] folder and reboot your PC.
If you are using your PC's power management function...
Right-click the [My Computer] icon, then select [Properties]–[System Properties]–[Device Manager]–
[System Devices]–[Advanced Power Management Support]. Desactivate the power management
function.
CORRECTIVE ACTION
• Make sure that the AC Adapter is connected to the
camcorder and that the power is on.
• Make sure that the USB cable is connected securely.
• Either use a USB hub that has its own power supply, or
connect the USB cable directly to the PC's USB
connector.
®
• Windows might not be recognizing the USB connector.
Make sure that the Universal Serial Bus controller is
enabled on the [System Properties] sheet in the [Control
Panel].
• Make sure that there is enough free space available in the
drive where you are trying to copy or save a file.
• Make sure that the drive where you are trying to copy or
save a file is not write-protected.
• Make sure that a file with the same name does not
already exist where you are trying to copy or save a file.
• Either use a USB hub that has its own power supply, or
connect the USB cable directly to the PC's USB
connector.
• Images will not be displayed correctly if the display is set
for 256-color (or fewer) display.

TROUBLESHOOTING

REFER TO:
Software
Installation and
USB
Connection
Guide
( pg. 9)
—
—