Toshiba RBC-AMT32E Operation Manual page 2

8
2
1
3
4
5
6
15
7
18
14
Air volume select display
The selected air volume mode is displayed.
(AUTO)
(MED.)
15
Louver Number display
(exapmle:01, 02, 03, 04)
16
Operation ready display
Displayed when cooling or heating operation is
impossible because the outdoor temperature
goes out of the operable range.
17
Mode select control display
Displayed when pushing "Operation mode select
" button while the operation mode is fixed to
heating or cooling by the system manager of the
air conditioner.
18
Louver lock display
(4-way Air Discharge Cassette Type
2H series only)
Displayed when there is a louver-locked unit in the
group (including 1 indoor unit by 1 outdoor unit).
(HIGH)
(LOW)
9 20 19
14
19
Unit Number display
Unit number of the indoor unit selected with
the unit select button or abnormal indication of
the indoor/outdoor unit.
20
Central control display
Displayed when the air conditioner is used
under the central control in combination with a
central control remote controller.
In case the remote controller is disabled by the
central control system,
The button operation is not accepted.
Even when you push ON/OFF, MODE, or
TEMP . button, the button operation is not
accepted.
(Settings made by the remote controller vary
with the central control mode. For details, refer
to the Owner's Manual of the central control
remote controller.)
164
10
17
11
16
12
13
flashes.