Cleaning - Silvercrest SLE 320 A1 Operating Instructions Manual

Hide thumbs Also See for SLE 320 A1:
Table of Contents

Advertisement

Available languages

Available languages

Cleaning

CAUTION
Potential appliance damage!
Protect the appliance from moisture and from the ingress of fl uids.
To avoid irreparable damage to the appliance, never immerse it in water.
Always remove the mains plug from the mains power socket before clean-
ing the appliance.
Do not use aggressive or abrasive cleaning agents, as these may corrode
the surface of the casing.
Do not clean the water tank
damaged.
If required, wipe the casing with a slightly damp cloth.
Remove the water tank
tank
In order to clean the inside of the water tank
lid. To do this, release the carrying handle from the retainer while pressing
it out sideways. When doing so, ensure that the handle plug coincides with
the opening in the water container (See Figure 3.)
Fig. 3
Now, remove the black lid from the water tank
To insert, follow the reverse sequence.
It is recommended that the water tank
weeks to prevent the build-up of mould and bacteria. To do this, fi ll the
water tank
repeatedly with lukewarm water. In addition, disinfection is recommended
following cleaning. To do this, use a standard, alcohol-based disinfecting
agent or high-proof alcohol. Both substances are completely harmless if
followed by repeated rinsing with lukewarm water.
SLE 320 A1
5
and pour away the water; then dry the water
5
5
thoroughly, both inside and out, before replacing it.
with lukewarm water, adding a standard detergent. Rinse
5
in a dishwasher. Otherwise, it will be
, you must remove the black
5
5
5
.
be cleaned regularly every two
5
GB
IE
CY
17

Advertisement

Chapters

Table of Contents
loading

Table of Contents