Active Display - Canon PowerShot D30 User Manual

•
To switch to Shooting mode from Playback mode, press the shutter button
halfway.
•
To deactivate Scroll Display, choose MENU
Display] > [Off].
•
To have the most recent shot displayed when you enter Playback mode,
choose MENU (= 26) > [1] tab > [Resume] > [Last shot].
•
To change the transition shown between images, access MENU
choose your desired effect in [1] tab > [Transition].
(= 26) > [1] tab > [Scroll
(= 26) and

Active Display

To switch images during image display, you can tap the camera gently on
the side, as shown below.
Switch to next image
•
Always keep the strap around your wrist and hold the camera
securely to avoid dropping it.
•
Images may not be switched in some cases, depending on how the
camera is tapped.
•
To switch images quickly while images are selected as described in step 2
of "Viewing" (= 80) (after you press the <n> button and deactivate
[Scroll Display] on the [1] tab), hold down the <q> button and tilt the camera.
Note that images appear grainy at this time.
•
To deactivate Active Display, press the <n> button, choose [Active Display]
on the [1] tab, and then choose [Off]
Still Images Movies
Switch to previous image
(= 26).
Before Use Before Use
Basic Guide Basic Guide
Advanced Guide Advanced Guide
Camera Basics Camera Basics
Using GPS Using GPS
Functions Functions
Auto Mode Auto Mode
Other Shooting Other Shooting
Modes Modes
P Mode P Mode
Playback Mode Playback Mode
Setting Menu Setting Menu
Accessories Accessories
Appendix Appendix
Index Index
81