NEC ElectraElite IPK User Manual

TO PLACE INTERNAL CALL
TO PLACE OUTSIDE CALL
MICROPHONE Press the MIC key. A lit MIC LED indicates that the MIC is
on. If you are on a speaker conversation, turning the MIC on
and off will mute and un-mute your speaker. If you are on a
handset call, turning the MIC on and off will also mute and un-
mute your conversation.
HOLD Press HOLD key. To retrieve, press flashing green button. To
put on hold with no reminder tone, and to prevent anyone else
picking up your held call, press the FEATURE key then the
HOLD key.
TRANSFER While connected to a call, press TRANSFER, receive transfer
dial tone. Dial extension number and hang-up. Call does not
complete until you hang up so you can stay on line to announce
caller if you wish.
-OR-
To transfer a caller directly to someone's voicemail, press
TRANSFER then the person's extension number, then 7.
PARK While connected to a call, press the PARK key. Choose a
PARK location (0-9). Hang up.
RETRIEVE To RETRIEVE a parked call, press the RETRIEVE key plus
PARK location number.
GROUP LISTEN While you are on a handset call, press the SPEAKER key and
the caller's side of the conversation will be broadcast over your
speaker. To turn off GROUP LISTEN, press the SPEAKER
key again
To display the last 10 numbers that you've dialed, press the
REDIAL
REDIAL key until the number you want is displayed then press
the * key.
AUTOMATIC If you receive a busy when dialing an outside number
REDIAL and you wish to have the system retry that number for you,
before you hang up press Auto-RD. The system will continue
to try that number for the next 10 minutes. When the line
becomes available, your phone will ring. If it does not become
available, your SPEAKER light will go out.
If you call a station internal and you wish that person to call you
back as soon as they get off the phone, press ACB after dialing
extension and receiving busy tone. When the person hangs up
their phone, your phone will ring and then their phone will ring.
U:\UCI\Web User Guides\elite user guide booklet.doc
Pick up handset, then dial 3-digit extension
number.
Pick up handset, press 9, then dial the phone
number.
DO NOT DISTURB Press the DND key to set and to cancel.
PAGE Lift handset, press PAGE and begin speaking after the tone.
CONFERENCE To build a conference call, with the first caller on the line, press
CONF, then dial the next party. When they have answered,
press the CONF key to join everyone. Repeat to add more
callers. You can only have a total of 3 people in the conference.
VOICE OVER/ If you dial an extension internally and you receive a
REPLY busy tone, press VO to over-ride the existing conversation. The
outside caller will not hear you and you will not hear
Either person until the inside user you have voice over'd chooses
to reply. To reply to a user who has used this feature to reach
you, press the REPLY key on your phone. The key will light up
when you conversing with the internal caller and will not light
when you are conversing with your external caller. The external
caller never hears either side of the conversation.
DIRECTORY The DIRECTORY key is a Caller ID scroll key. Press the
DIRECTORY key to display up to 30 incoming calls. A is for
calls that you've answered and M are ones that you missed.
SPEED DIAL To use the Speed Dial, press the SYS or the STA key
(TO USE) in the display of your phone, then press the UP or DOWN key to
scroll to the number you wish. Once the number is displayed,
pick up the phone. To search for a number by name, press the
SYS or the STA key in the display of your phone, then using the
key pad on your phone, press the number with the corresponding
first letter of the name you are looking for and then press the UP
or DOWN key to start the search. Once the number is displayed,
pick up the phone to complete the call. If you know the 2 digit
buffer number where you number is stored, you can press
REDIAL and then the 2-digit number to dial.
SPEED DIAL (Station)
PROGRAM 1. Press the FEATURE key
2. Press the REDIAL key.
3. Dial the Speed Dial Memory location 80~99.
4. Dial the trunk access code, i.e. 9 (if necessary).
5. Dial the telephone number to be stored (24 digits
maximum).
6. Press the HOLD key (if entering a name) and dial
the name of the party (13 letters maximum). Use the
# key to move to the next character if it is on the same
key or press the # key twice to create a space.
7. Press the FEATURE key again
Presented By Unified Communications Integrators