Booster Function - Kenwood KHC604-IND Instructions For Use Manual

Induction built-in cooktop
Table of Contents

Advertisement

BOOSTER FUNCTION

This function allows the cooking zone to operate at the "Booster" maximum power (above
the nominal power) for maximum 5 minutes; it could be used, for example, to rapidly heat
up large amount of water .
The "Booster" function is always limited to a maximum of 5 minutes.
This function is NOT available on the smaller cooking zones (Ø 160 mm).
To activate the "Booster" function:
Set the power level "
the relevant display shows "
At the end of the "Booster" program (5 minutes) the cooking zone is automatically set
to the power level "
Note: if a cooking zone is still hot, it is not possible to use the "Booster" function
P
and "
" will flash if you try to activate. The cooking zone is automatically set to the
maximum power level ("
To deactivate the "Booster" function:
Set a different power level on the selected cooking zone .

or
Switch Off the cooktop .
IMPORTANT NOTES:
The "Booster" function is not suitable for use with non water based cooking.
Do not use this function for heating oil (e.g. deep fat frying).
9
" on the selected cooking zone, then just touch the key
P
" (fig. 2.5).
9
" .
9
") .
Fig. 2.5
until
13

Advertisement

Table of Contents
loading

Table of Contents