Connecting The Aerial And Vcr - JVC PD-35DX, PD-42DX Instructions Manual

Connections

Connecting the aerial and VCR

• Aerial cable is not supplied. Use a good quality 75-ohm
coaxial cable.
• Read the manual that came with the VCR before
connecting.
If not connecting a VCR (see fig.A):
Connect an aerial cable to the aerial socket on this
receiver.
If connecting a VCR (see fig.B):
1 Connect the aerial cable to the aerial input
socket on the VCR, and connect the VCR and
receiver with another aerial cable
2 Connect the VCR's VIDEO OUT (video output)
terminal and the receiver's VIDEO terminal with
a video cable
To connect a VCR to the receiver with an S-VIDEO
cable:
Connect the VCR's S-VIDEO OUT (S-VIDEO output)
terminal and receiver's "S" terminal with an S-VIDEO
cable A, instead of connecting with a video cable.
Note that the connection with a video cable will be
ignored in case you connect a VCR to the receiver with
both video cable and S-VIDEO cable.
3 Connect the VCR's VIDEO OUT (audio L/R
output) terminals and the receiver's AUDIO
terminals (L/MONO and R) with an audio cable
• If the VCR's audio output is in mono, connect the
VCR's AUDIO OUT (audio output) terminal and the
receiver's AUDIO L/MONO terminal with an audio
cable.
• To connect additional external devices, please see
"Connecting the external devices" on page 38.
12
Fig.A
Back of the receiver
Fig.B
Back of the receiver
AUDIO
R
VIDEO-1
R
VIDEO-2
R
VIDEO-3
1
3 2
A
R
VIDEO-1
R
VIDEO-2
R
VIDEO-3
IN O
VIDEO S-VIDEO AUDIO
L/MONO R
L COMPONENT
Pr P
L
R-AUDIO-L
A
1