Table of Contents
Advertisement
28
EN
Power Save Mode
The Power Save mode switches the camera automatically off when no operation has been performed for
more than 2 minutes.
Power Dial
Lock Button
LCD monitor
CAMERA MENU
CAMERA
P I CTURE MODE
SYSTEM
EX I T
CAMERA MENU Screen
1
Turn the Power Dial, while pressing its Lock
Button, to " " or " " and push the MENU
Jog Dial.
• The CAMERA MENU Screen appears.
2
Rotate the MENU Jog Dial to select "SYSTEM"
and push it.
• The SYSTEM Setup Screen appears.
3
Rotate the MENU Jog Dial to select "POWER
SAVE" and push it.
• The POWER SAVE Screen appears.
4
Rotate the MENU Jog Dial to select "ON" and
push it twice.
• The shooting screen reappears and the Power
Save mode is activated.
MANUAL SHOOTING
SYSTEM
POWER SAVE
FLASH ADJ .
DATE / T I ME
EX I T
SYSTEM Setup Screen
To deactivate the Power Save mode . . .
.... select "OFF" in step 4. When the Power Dial is
set to " ", " ", " " or "
power will stay on, even when no operations
are performed.
NOTES:
To switch the camera on again after it has been
switched off by the Power Save mode, turn the
Power Dial to "OFF", wait for more than 1 second,
then turn it to "
Do not forget to switch the camera off when not
in use, so that the batteries do not become
prematurely exhausted.
The Power Save mode is factory-preset to "ON".
MENU Jog Dial
POWER SAVE
ON
OFF
EX I T
POWER SAVE Screen
", the camera
", "
", "
" or "
(cont.)
".
Advertisement
Table of Contents
