Settings (Step 2 Network Settings)
2-2 Setting PC's IP Address [Windows XP]
Upon installing the camera, set the IP address of the PC that is used to operate this
camera.
For Windows XP, set according to the following procedure.
☞
(For Windows 2000,
Page 30)
Note
Under a DHCP environment and when the IP address assigned to V. Networks is already known,
it will not be necessary to perform 2-2 "Setting PC's IP Address" as the PC's IP address is
automatically acquired from the DHCP server.
1.
Click
.
• Right-click on [My Network] and select [Properties].
2.
Slect the network for which the PC that operates this camera is connected to.
• Right-click to select [Properties].
28
Ensure that it is selected.
Note
Select "Install (N) ..." if [Client for
Microsoft Networks] or [Internet
Protocol (TCP/IP)] is not displayed.
3.
Select [Internet Protocol (TCP/IP)] and click [Properties].
4.
Select [Use the following IP address], set the [IP address] and [Subnet mask] and
click
.
5.
Click
on the [Local Area Connection Properties] screen.
Select [Internet Protocol (TCP/IP)].
Click [Properties].
Select [Use the following IP address].
Set [IP address] to 192.168.0.3.
Notes
• Make sure to note down the original
IP address before changing.
• Do not use the same IP address
elsewhere within the same network
environment.
Set Subnet mask to an appropriate value.
Ask the network administrator if
necessary.
Click
.
29