Setting Dip Switches; Back Panel Connector Layout - Motorola MC3000 Operating And Installation Manual

Installation

Setting DIP Switches

Setting DIP Switches
The deskset must be opened for access to the DIP switches. You must remove power
prior to opening the deskset. The one DIP switch S46 is reserved for future use.
Table 2-3: DIP Switch Settings Table
Switch 4 Positions
* = Default
S46 *OFF, ON
*OFF, ON
*OFF, ON
*OFF, ON

Back Panel Connector Layout

Figure 2-7: MC3000 Deskset - Back panel
2-8
Function
Reserved for future use
Reserved for future use
Reserved for future use
Reserved for future use
MC3000 Digital Deskset Operator and Installation Manual
(6880309L15-A)