Digital Remote Control Radio Operation - Motorola MC3000 Operating And Installation Manual

Digital deskjet

Hide thumbs Also See for MC3000:

User manual (146 pages)

User manual (152 pages)

Quick start manual (2 pages)

Table Of Contents

Table of Contents

corner of the LCD display. At any time you can press the Shift button to move back

and erase one character at a time.

9. To initiate the modem dial up, press the Mode Down button again to access the "Con-

nect" option in the sub menu. The top left hand side of the LCD display will state

"Press Menu to Connect".

10. To execute the modem connection and exit the sub menu, press the Menu/Home but-

ton. The first of the LCD display will state "Trying to Connect". As the deskset attempts

to make the connection, the following error messages may appear on the LCD dis-

play: Modem: No Dial Tone, Modem: Busy, Modem is Connected.

11. To exit the Configuration and Test program, press the Menu/Home button again.

To disconnect from a 'dial up' modem connection to a remote radio:

1. Press and hold the Shift button and then press the Sel button. When you enter the

test program, the first line of the LCD display will read the "Button Test" and the sec-

ond line will read "Press Menu".

2. At any time you can press the Mode Up or Down buttons to move up or down the

menu options. Options (1 - 7) on the menu are tests you can run. Options (8 -17) on

the menu are deskset parameters that you can configure.

3. After you enter the program, press the Mode Down button until you get to the desired

parameter (number 15 "Dial Up" on the main menu). Look at the LCD display to find

the parameter. The first line states which of the parameters you are currently setting

and the second line states the parameter value.

4. Press the Menu/Home button to enter the sub menu. The sub menu has four choices:

Data, Voice, Connect and Disconnect.

5. Press the Mode Up or Down button three times to navigate to the sub menu option

"Disconnect". The top left hand side of the LCD display will state "Press Menu to Dis-

connect".

6. To disconnect the deskset from the radio (through the modem) and exit the sub menu,

press the Menu/Home button.

7. To exit the Configuration and Test program, press the Menu/Home button again.