Changing The Time; Room Monitor - NEC SV8100 User Manual

CHANGING THE TIME

INTERRUPT A CALL
(Tone override)
BARGE IN (INTERRUPT A

ROOM MONITOR

V5
Note – Must be done from reception or main handset
Leave Handset Down
Press Speaker
Dial 728
Dial two digits for the hour (24 hour)
Dial two digits for the minutes
Press Speaker to hang up
NOTE:
The date can only be set / changed in system programming
* Note - Will not work if called station has CFW B/N activated
To send signals to an extension busy on a call:
Dial Extension that is busy
press # When you hear the busy tone
(The called extension hears call alert notification, press the
hold button and both parties are connected.)
CALL)* Note - Must
be activated in programming
Lift Handset
Dial 710
Dial Busy Extension
Room monitor lets an extension listen to the sounds in co-workers area, for
example, a receptionist could listen for sounds in the warehouse when it's
left unattended.
NOTE:
(A Room monitor key must be programmed. Room monitor must be
activated at the extension initiating the monitor and at the extension that is to be
monitored. You can only listen to one extension at a time.)
To activate Room Monitor from initiating extension:
Press Room Monitor key
Dial Extension number you are at
(You can place and answer calls whilst monitor is active)
To activate Room Monitor from extension to be monitored:
Press Room Monitor key
Dial Extension number you are at
(The extension user will hear a warning tone).
9