Removing And Reinstalling The Main Parts - Sharp XL-520W Service Manual

XL-520W/CP-520

REMOVING AND REINSTALLING THE MAIN PARTS

CD MECHANISM SECTION
Perform steps 1,to 5 of the disassembly method to remove the
CD mechanism.
How to remove the pickup (See Fig. 8)
1. Remove the mechanism cover, paying attention to the
pawls (A1) x 4 pcs.
2. Remove the screws (A2) x 2 pcs., to remove the shaft (A3)
x 1 pc.
3. Remove the stop washer (A4) x 1 pc., to remove the gear
(A5) x 1 pc.
4. Remove the pickup.
Note:
After removing the optical pickup connector wrap the front
end of connector in conductive aluminium foil so as to
prevent damage of optical pickup by static electricity.
Mechanism Cover
( A1 ) x2
– 8 –
( A1 ) x2
( A2 ) x2
ø2.6 x6mm
CD Mechanism
Shaft
( A3 ) x1
Gear
( A5 ) x1
StopWasher
( A4 ) x1
Pickup Unit
Figure 8