Power Cut - Miele HM 16-80 Operating Instructions Manual

Ironing

Power cut

In the event of a power cut, pull up
the emergency release lever.
If there is a power cut when the rotary
ironer is in use, the heater plate will stay
on the roller. The item being ironed will
then be held there with the risk of it be-
coming scorched. To free the trapped
item:
^ Pull up the emergency release lever.
– the pressure is reduced and the item
can then be removed, by pulling it
out towards you or downwards, de-
pending on how far into the ironer it
is.
When the current has been restored
(the indicator light in the main switch
comes on) push the emergency release
lever back down. You can now continue
ironing in the usual way.
18