Bar Code Capture With Cs3070 Bluetooth Scanner - Motorola ET1 User Manual

The Decode LED lights green and a beep sounds, by default, to indicate the bar code was decoded
5.
successfully.
The captured data appears in the text field.
6.

Bar Code Capture with CS3070 Bluetooth Scanner

The CS3070 Bluetooth scanner captures bar code data, and transmits it to the ET1 via Bluetooth. The scanner
supports Bluetooth human interface device (HID) connection to the ET1 where the scanner emulates a
keyboard, as well as Serial Port Profile (SPP) connection where the scanner behaves as if there is a serial
connection. Refer to the ET1 Enterprise Tablet Integrator Guide for setup and configuration information.
Exit Window
CS3070 Bluetooth Scanner
Figure 3-2
To capture bar code data:
Ensure that an application is open on the ET1 and a text field is in focus (text cursor in text field).
1.
Aim the scanner at the bar code.
2.
Press the scan (+) button.
3.
CS3070 Scanning
Figure 3-3
Ensure the scan line crosses every bar and space of the symbol.
4.
Correct
Linear Scanner Aiming Pattern
Figure 3-4
Bluetooth Button/LED
Delete Button
Scan Button
LED
Incorrect
Data Capture 3 - 3