Panasonic DP-C406 Function Manual page 26

5
Select "01 Fax Parameters".
6
Select "120 - 159" tab, and scroll the
screen, and then select "131 Job
Tracking".
1 3
Each Fax Parameter can be directly
selected by inputting the corresponding
number with the Keypad for quick operation.
If you know the parameter number, enter the
number with the Keypad, and then press the
Start key.
Ex: Enter "132" with the Keypad, and then
press the Start key to select "132 Via Fax
Server".
7
Select the Job Tracking function, and
then select "OK".
26
2
1 2
None Disables Job Tracking.
Tx Records sending (transmit) only.
Rx Records receiving only.
Tx & Rx Records sending and receiving.
8
Select the Email address to which to
send the log, and then select "OK".
9
Select the print out method for the
received document(s), and then select
"OK".
This screen only appears if "Rx" or "Tx & Rx"
is selected in step 7.
Inc Prints only if the log was unable
to be sent to the specified
destination in step 8.
On Always prints.
10
Press the Reset key to return to
standby.
1 2
1 2