Table of Contents
Advertisement
E41: Power failure
E42: No disc
The error programme will be deleted once you
check the error in the programme list, or once you
cancel the timer-standby mode and re-enter it.
Press [CLEAR] to erase the selected
programme.
VPS (Video Programme System)
/ PDC (Programme Delivery
Control)
The Video Programme System (VPS) or Programme
Delivery Control (PDC) assures that the TV
programmes you have programmed for timer
recording are recorded exactly from beginning to end,
even if the actual broadcasting time differs from the
scheduled time due to a delayed start or extension of
the programme duration. Furthermore, if a
programme is interrupted, the recording will also be
interrupted automatically and resumed when the
programme starts again.
If the VPS / PDC signal drops out because the
broadcast signal is weak, or if a broadcasting station
does not transmit a regular VPS / PDC signal, the
timer recording is performed in normal mode (without
VPS / PDC) even if it was programmed for VPS /
PDC. If the starting time of the VPS / PDC timer
recording is between 0:00 and 3:59 on a given day,
the VPS / PDC function will operate from 20:00 on the
previous day to 4:00 on the given day. If the starting
time of the VPS / PDC timer recording is between
4:00 and 23:59 on a given day, the VPS / PDC
function will operate from 0:00 on the day to 4:00 on
the given day. This means that if the relevant
programme is broadcasted within this period, it is
recorded correctly. If the timer is not programmed
correctly, the incorrect timer setting stays in effect
unless you cancel it. To cancel an incorrect timer
setting, refer to "Checking, Cancelling, or Correcting
the Timer Programming Information" on page 30.
Timer Recording Using
®
the S
V
System
HOW
IEW
You can programme the timer using the S
programming numbers that are printed in your local
TV guide magazine.
1
In stop mode, press
[the SHOWVIEW button].
• If the Timer Programming list is full, the Timer
Programming mode is activated instead of the
S
V
programming mode.
HOW
IEW
• Press [the SHOWVIEW button] again in the
S
V
programming mode to switch to the
HOW
IEW
Timer Programming mode.
2
Set the S
number of the programme you want
to record using [the Number
buttons], then press [ENTER].
3
Select the desired recording pattern
using [Cursor U / D], then press
[ENTER].
Once: To record a TV programme once, as you
set.
Daily: To record a TV programme at the same
time on the same channel everyday.
M-F: To record a TV programme at the same time
on the same channel from Monday through
Friday.
Weekly: To record a TV programme at the same
time on the same channel every week.
4
Select a recording channel using
[Cursor U / D], then press
[Cursor P].
1. Daily
2. - - -
3. - - -
4. - - -
5. - - -
V
HOW
IEW
6. - - -
7. - - -
8. - - -
• If your local channel information is programmed
in the unit's memory, your local channel number
appears automatically.
• If your local channel information is not
programmed in the unit's memory, "P– –" may
appear.
• If you select the channel number using
[Cursor U / D], it is stored in the unit's
memory.
V
programming
HOW
IEW
ShowView System
Please enter a ShowView No.
- - - - - - - - -
ShowView System
Once
Daily
M-F
Weekly
VCR DVD
Timer Programming
DVD
Date
Start
End
CH
Speed
VCR
7:30
14:15
P08
DVD
LP
VPS
PDC
OFF
31
EN
Advertisement
Table of Contents
