Table of Contents
Advertisement
Symptom
There is no picture.
Picture noise appears.
Sound is noisy.
The unit does not play back the disc.
There is no sound.
Playback image freezes for a moment.
The unit does not play back the disc from the
beginning.
The unit starts playing back the disc
automatically.
Some functions such as Stop, Search, or
Slow-motion Playback cannot be performed.
The language for the sound track cannot be
changed.
The subtitle language cannot be changed or
turned off.
Angles cannot be changed.
Recording does not start immediately after
pressing [DVD REC I].
Recording does not stop immediately after
you press [STOP S].
The disc tray does not open when you press
[OPEN/CLOSE/EJECT O].
"Repairing" appears on the display.
68
EN
DVD
• If the setting menu display appears, press [SET UP] or [RETURN] to turn off
the display.
• The disc is dirty or flawed.
• If the unit is connected to your TV via a VCR, or if it is connected to a
combination TV / VIDEO player, the copy-protection signal applied to some
DVD programmes could affect picture quality. If you still experience this
problem even when you connect the unit directly to your TV, try connecting the
unit to your TV's S-VIDEO input.
• The disc is dirty or flawed.
• No disc is inserted.
• A blank disc is inserted.
• The disc is upside down. Insert the disc with the labeled side facing up.
• The disc is not correctly inserted.
• The unit cannot play back certain discs (such as a CD-ROM.) (See page 37.)
• The region codes on the DVD-Video and the unit are not matched. (See page
37.)
• Moisture has condensed inside the unit. Remove the disc and leave the unit
turned on for about two hours until the moisture evaporates. (See page 3.)
• The unit cannot play back the disc if it was recorded on another recorder and
not finalised. (See page 36.)
• If the audio signal is not output from the COAXIAL DIGITAL AUDIO OUT jack,
check the Audio setting. (See page 60.)
• During the playback of a two layered disc, the picture may freeze for a moment
while playback switches from the first to the second layer. This is not a
malfunction.
• Resume playback is activated. (See page 41.) Press [STOP S] twice.
• You have inserted a disc whose title menu or DVD menu automatically
appears on the TV screen when it is first inserted.
• The DVD-Video features an auto playback function.
• Depending on the disc, you may not be able to perform some of those
operations. See the instruction manual supplied with the disc.
• Multilingual tracks are not recorded on the DVD-Video, DVD-R, or DVD-RW
being played back.
• The DVD-Video prohibits the changing of the language for the sound track.
• Try changing the language using the DVD-Video menu.
• Multilingual subtitles are not recorded on the DVD-Video.
• The DVD-Video prohibits changing the subtitles.
• Try changing the subtitles using the DVD-Video menu.
• Multi-angles are not recorded on the DVD-Video being played back.
• You can change the angle only if the disc contains multi-angle scene. Angles
can be changed only when the multi-angle scene appears on the screen.
• The DVD-Video prohibits changing angles.
• Try changing the angle using the DVD-Video menu.
• An unused DVD-R or DVD-RW was inserted. It takes a while for the unit to
automatically format a DVD-RW.
• It will take a few seconds for the unit to send data to disc before recording can
stop.
• It may take a few seconds for the disc tray to open after you have recorded or
edited a disc.
• This is because the unit is sending data to the disc.
• If a power failure occurs or the mains cable is unplugged during recording,
finalising, formatting or editing (even after "Wait for a moment." message
disappeared), a repairing process will begin automatically when the unit is
turned on next time.It may take several minutes up to about four hours.
Remedy
Advertisement
Table of Contents
