Displaying The Playing Time And Play Information; Changing The Name Of A Recorded Programme - Sony RDR-HX825 Service Manual

3
Select a title, and press ENTER.
The sub-menu appears.
The sub-menu displays options
applicable only to the selected item. The
displayed options differ depending upon
the model, situation, and disc type.
Sub-menu
4
Select "Play," and press ENTER.
Playback starts from the selected title.
To stop playback
Press x (stop).
To scroll the list display by page (Page
mode)
Press while the list display is turned
/
on. Each time you press , the entire
/
Title List changes to the next/previous page
of titles.
About the Title List for HDD/DVD-RWs/
DVD-Rs (VR mode)
You can switch the Title List to show
Original or Playlist titles.
While the Title List menu is turned on, press
</,.
36
B Available functions for DVD VIDEOs
( angle/ audio/ subtitle,
etc.), or playback data for DATA
DVDs and DATA CDs
C The current selected function or audio
setting (appears only temporarily)
Example: Dolby Digital 5.1 ch
Rear (L/R)
Front (L/R) + LFE (Low Frequency
Centre Effect)
D The current selected angle
E Disc type *1
/format (page 8)
F Title type (
only appears for Playlists)
G Play mode
H Recording mode (page 54)
I Playing status bar *2
J Title number (page 72)
(Shows either track number, scene
number, or file number for CDs,
VIDEO CDs, DATA DVDs, or DATA
CDs.)
K Album name appears for DATA DVDs
or DATA CDs.
L Playing time
*1
Displays Super VIDEO CDs as "SVCD," DATA
CDs as "CD" and DATA DVDs as "DVD."
*2
Does not appear with VIDEO CDs, DATA
DVDs, and DATA CDs.
z Hints
• If "DTS" of "Audio Connection" is set to "Off" in
the "Audio" setup, the DTS track selection option
will not appear on the screen even if the disc
contains DTS tracks (page 104).
• When "Auto Display" is set to "On" (default) in
the "Video" setup (page 103), information
automatically appears on the screen when the
recorder is operated.
38
To change the title order (Sort)
While the Title List menu is turned on, press
OPTIONS to select "Sort Titles." Press M/m
to select the item, and press ENTER.
Order Sorted
By Date In order of when the titles
were recorded. The title that is
recorded most recently is
listed at the top.
By Title In alphabetical order.
By Number In order of recorded title
number.
Unseen Title In order of when the titles
(HDD only) were recorded. The title that is
recorded most recently and
has not been played is listed at
the top. Playlist titles are not
displayed.
To change a title thumbnail picture
(Thumbnail) (HDD/DVD-RW/DVD-R in VR
mode only)
You can select a favourite scene for the
thumbnail picture shown in the Title List
menu.
1
Press TITLE LIST.
Press </, to switch the Title Lists, if
necessary.
2
Select a title, and press ENTER.
The sub-menu appears.
3
Select "Set Thumbnail," and press
ENTER.
The display for setting the thumbnail
point appears and the title starts to play.
4
While watching the playback picture,
press m/M to select the scene you
want to set for a thumbnail picture, and
press ENTER.
Playback pauses.
5
Press ENTER if the scene is correct.
If the scene is incorrect, press c/C to
select the scene you want to set for a
thumbnail picture, and press ENTER.
The display asks for confirmation.
• To change the thumbnail, press M.
6
Select "OK," and press ENTER.
The scene is set for the title's thumbnail
picture.
b
Note
Playing time of MP3 audio tracks may not be
displayed correctly.
Checking the remaining disc
space
You can check the remaining disc space
using the "Disc Information" display.
1
Insert a disc.
See "1. Inserting a Disc" on page 33.
2
Press OPTIONS to select "Disc
Information," and press ENTER.
The "Disc Information" display appears.
Available settings differ depending on
the disc type.
Example: When a DVD+RW is inserted.
"Remainder" (approximate)
• The remaining recording time in each
of the recording modes
• Disc space bar
• Remaining disc space/total disc space
z Hint
To increase disc space, see "To open up disc space"
(page 78).
1-9
To turn off the Title List
4. Displaying the Playing
Press TITLE LIST.
Time and Play
z Hints
• After recording, the first scene of the recording
Information
(the title) is automatically set as the thumbnail
picture.
• You can select "TITLE LIST" from the System
HDD
Menu.
- R
b
Notes
DATA DVD
• The title names may not appear for DVDs created
You can check the playing time of the current
on other DVD recorders.
• It may take a few seconds for the thumbnail title, chapter, track, or disc. Also, you can
pictures to be displayed.
check the disc name recorded on the DVD/
• After editing, the title thumbnail picture may
CD.
change to the first scene of the recording (title).
• After dubbing, the title thumbnail picture set on
the source recording is cancelled.
DISPLAY
Press DISPLAY.
The displays differ depending on the disc
type or playing status.
A Title number/name
5
5. Changing the Name of
a Recorded Programme
HDD + RW - RW - RW + R
VR
Video
- R - R
VR
Video
You can label a DVD, title, or programme by
entering characters. You can enter up to 64
characters for a title or disc name, but the
actual number of characters displayed in the
menus such as the Title List will vary. The
steps below explain how to change the name
of the recorded programme.
Number
buttons
INPUT
SELECT
6
TITLE LIST
</M/m/,,
ENTER
1
Press TITLE LIST.
2
Select a title, and press ENTER.
The sub-menu appears.
3
Select "Title Name," and press
ENTER.
The display for entering characters
appears.
4
Press </M/m/, to move the cursor
to the right of the display and select
"A" (upper-case), "a" (lower-case),
or "Symbol," and press ENTER.
7
The characters for the selected type are
displayed.
+ RW - RW - RW + R
VR
Video
- R DVD VCD
VR CD
Video
DATA CD
ENTER
OPTIONS
(Shows either track number, track
name, scene number, or file name for
CDs, VIDEO CDs, DATA DVDs, or
DATA CDs.)
,continued
37
Press </M/m/, to select the
character you want to enter, and press
ENTER.
The selected character appears at the top
of the display.
Example: Input Title Name
The type of characters will change
according to the language you select in
"Easy Setup." Some languages allow you
to enter an accent mark.
To enter a letter with an accent mark,
select an accent followed by the letter.
Example: Select " ` " and then "a" to
enter "à."
To insert a space, select "Space."
Repeat steps 4 and 5 to enter the
remaining characters.
Input row
To erase a character, move the cursor to
the right of the character at the input row.
Select "Back" and press ENTER.
To insert a character, move the cursor to
the right of the point where you want to
insert the character. Select the character
and press ENTER.
To erase all of the characters, select
"Clear All" and press ENTER.
Select "Finish," and press ENTER.
To cancel the setting, select "Cancel."
,continued
39