Recording Features - JVC 0503-AH-ID-JVE Instructions Manual

Recording Features

Turn on the TV and select the AV mode.
Slide TV/CABLE/SAT switch to the right.
If the recorder is turned on with HDD deck selected,
there may be about 30 seconds' delay in starting to
show pictures on the screen.
Pausing During Recording
While you are recording a TV programme and watching it, you
can pause Live Memory Playback to answer a phone call or so
on without missing any scene in the programme. Only the image
on the screen pauses and recording still continues background.
This feature is also available while watching a TV programme.
1
Pause Live Memory Playback.
Push the JOG dial.
OR
9
Press during Live Memory Playback.
2
Resume Live Memory Playback.
Press 4 from the pause point.
Record One Programme While
Watching Another
Once recording is in progress, all you need to do is to set
the channel controls on the TV for the station you wish to
view.
The programme selected with the TV's channel controls
appears on the TV screen, while the one selected with the
recorder's VCR PR buttons is recorded on the tape.
If a decoder is connected to the recorder (
select a scrambled channel as well with the TV channel
controls.
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-min. increments), and shuts the recorder off
after recording is finished.
1
Start recording.
Press
2
Engage the ITR mode.
Press
display panel.
ITR timer duration also appears in the TV screen. (
3
Set the recording duration.
If you want to record for more than 30 minutes, press
to extend the time. Each press extends recording time by
30 minutes.
NOTE:
You can only perform ITR using the
front panel.
Receiving Stereo and Bilingual
Programmes
Your recorder is equipped with a Sound-Multiplex decoder (A2)
and a Digital stereo sound decoder (NICAM) making reception
of stereo and bilingual broadcasts possible.
When the channel is changed, the type of broadcast being
received will be displayed on the TV screen for a few seconds.
Type of Broadcast Being
Received
A2 Stereo
A2 Bilingual
Regular Monaural
NICAM Stereo
NICAM Bilingual
NICAM Monaural
NICAM FM Sound
NOTE:
"O.S.D." must be set to "ON" or the on-screen displays will not
appear (
To Record Stereo and Bilingual Programmes (A2)
Stereo programmes are automatically recorded in stereo.
Bilingual programmes are automatically recorded in bilingual.
To Record NICAM Bilingual Programmes
Set "AUDIO REC" to "NICAM" to record the NICAM bilingual
pg. 78), you can
programme (
NOTES:
If the quality of stereo sound being received is poor, the
broadcast will be received in monaural with better quality.
Before playing back a programme recorded in stereo, or a
bilingual programme, refer to "Soundtrack Selection" on
page 32.
7
on the recorder.
7 7
again. " " blinks and "0:30" appears on the front
On-screen Display
I
NICAM
NI. I
NICAM
NICAM
pg. 84).
pg. 81).
33
EN
pg. 9)
7
button on the recorder's
NI.
7