JVC HM-DH40000U Instructions Manual page 37

1
Access Main Menu screen
Press MENU.
2
Access Guide Channel Set screen
1 Press @ # move
the arrow to
"INITIAL SET
UP", then press fi
or OK.
2 Press @ # to move
the arrow to
"GUIDE
CHANNEL", then press fi or OK.
3
Input guide channel number
Press @ # to input the
VCR Plus+ guide
channel number as
shown in the TV
listing.
If you receive your
channels with a
cable box and if
you have properly
set your Controller,
"CABLE CH" appears in place of "VCR CH". If
not, refer to pages 15 – 17 and re-perform the
procedure.
In that case, it is possible to change the channel
by 10 channels by pressing and holding @ # in
steps 3 and 4.
FUNCTION SET UP TUNER SET UP INITIAL SET UP
CLOCK SET GUIDE CHANNEL OTHER
GUIDE CH 6
VCR CH
– –
OK
MENU
SELECT WITH ARROW KEYS
THEN PRESS [OK]
SELECT
EXIT
(Ex.) When inputting the
guide channel number 6
for WNJU(Ind.)
FUNCTION SET UP TUNER SET UP INITIAL SET UP
CLOCK SET GUIDE CHANNEL OTHER
GUIDE CH 6
VCR CH – –
OK
MENU
SELECT WITH ARROW KEYS
THEN PRESS [OK]
SELECT
EXIT
4
Input receiving channel number
Press %fi to move
the arrow to "VCR
CH", then press @ #
to input the number
of the channel on
which the guide
channel's broadcasts
are received.
Repeat steps 3 and
4 for each
instance.
5
Return to normal screen
Press MENU.
37
EN
(Ex.) If WNJU(Ind.) is
received on channel 47
FUNCTION SET UP TUNER SET UP INITIAL SET UP
CLOCK SET GUIDE CHANNEL OTHER
GUIDE CH
6
VCR CH
47
OK
MENU
SELECT WITH ARROW KEYS
THEN PRESS [OK]
EXIT SELECT