On-Screen Display - JVC HM-DH40000U Instructions Manual

On-screen display

1 Cassette indication
2 Cassette type indication :
3 Index no. indication :
4 VCR operation mode indication
5 Audio monitor indications :
6 Clock time
Time counter*
Tape remaining time (When "REMAIN"
appears)**
* To reset the time counter, press C. RESET on the Remote.
The counter reading becomes "0:00:00". It is also reset
when a tape is inserted.
** The tape remaining time is calculated based on the
recording speed being used. The indicated remaining
time is only an estimate.
7 Recording mode indication :
Recording speed indication
8 Image format (HD/SD)
9 Channel and auxiliary input ("L-1", "L-2", "F-1"
and "I-1" etc.)
0 Audio Indications
STEREO When receiving the stereo broadcast
SAP When receiving SAP (Second Audio
Program) broadcast
SAP STEREO When receiving stereo and SAP
broadcast
Dolby D When playing back and receiving a
Dolby Digital signals
D-VHS
INDEX -9
B
JVC
D-VHS
pg. 26
pg. 24
pg. 23
pg. 26, 27
HD
D-VHS STD
L R 12:59 AM
E
DH40000
STREAM
PCM
AUDIO 1
AUDIO 2
1+2 MIX
! Icons :
pg. 25
: appears when a D-VHS cassette contains
the multiple programs
: appears when a D-VHS cassette contains
the multiple angle
: appears when a D-VHS cassette contains
the audio in multiple language
: appears when a D-VHS cassette contains
the subtitle in multiple language
NOTE:
The subtitles does not appear while the on-screen display is
displayed.
@ Selections of the selected icon (!)
# Model name of the device connected to the
i.LINK connector
$ Brand name of the device connected to the
i.LINK connector
% Type of device connected to the i.LINK
connector
^ Tape position indicator :
CH 123
SAP
OFF
CC1
CC2
CC3
CC4
When playing back and receiving a
audio signals in other new formats
When playing back and receiving a
PCM audio signals
Depends on the "DV AUDIO REC"
setting ( pg.55)
pg. 22
85
EN