Using The Setup Wizard - Dell NSA E5500 Getting Started Manual

3. The SonicWALL Setup Wizard launches and guides you
through the configuration and setup of your Dell
SonicWALL NSA E5500.
The Setup Wizard launches upon initial loading of NSA
E5500 management interface.
4. Follow the on-screen prompts to complete the Setup
Wizard.
Depending on the changes made during your setup
configuration, the appliance may restart.

Using the Setup Wizard

If you cannot connect to the Dell SonicWALL NSA E5500 or the
Setup Wizard does not display, verify the following
configurations:
• Did you correctly enter the Dell SonicWALL NSA E5500
management IP address in your Web browser?
• Are the Local Area Connection settings on your computer set
to use DHCP or set to a static IP address on the
192.168.168.x/24 subnet?
• Do you have the Ethernet cable connected to your computer
and to the X0 (LAN) port on your security appliance?
• Is the connector clip on your network cable properly seated in
the port of the security appliance?
31 | Initial Setup
• Some browsers may not launch the Setup Wizard
automatically. In this case:
• Log into the NSA E5500 using "admin" as the user name
and "password" as the password.
• Click the Wizards button on the System > Status page.
• Select Setup Wizard and click Next to launch the Setup
Wizard.
• Some pop-up blockers may prevent the launch of the
Setup Wizard. You can temporarily disable your pop-up
blocker, or add the management IP address of your NSA
E5500 (192.168.168.168 by default) to your pop-up
blocker's allow list.