Dell NSA E5500 Getting Started Manual page 36

3. Point the Web browser on your computer to
192.168.168.168. The SafeMode management interface
displays.
4. If you have made any configuration changes to the security
appliance, select the Create Backup On Next Boot
checkbox to make a backup copy of your current settings.
Your settings will be saved when the appliance restarts.
5. Click Upload New Firmware, and then browse to the
location where you saved the SonicOS firmware image,
select the file and click the Upload button.
6. Select the boot icon in the row for one of the following:
• Uploaded Firmware - New!
Use this option to restart the appliance with your
current configuration settings.
• Uploaded Firmware with Factory Default Settings - New!
Use this option to restart the appliance with default
configuration settings.
7. In the confirmation dialog box, click OK to proceed.
8. After successfully booting the firmware, the login screen is
displayed. If you booted with factory default settings, enter
the default user name and password (admin / password) to
access the Dell SonicWALL management interface.
If You Are Following
Scenario...
A - NAT/Route Mode
Gateway
B - NAT with State Sync Pair
C - L2 Bridge Mode
Proceed to Section:
Additional Deployment Configuration
page 46
Configuring a Stateful HA Pair
page 37
Configuring L2 Bridge Mode - page 43
Initial Setup |
-
-
36