General Programming
[333] TRS Entry Code Assignment for Extra Table
Description
This program allows you to specify the numbers for extra Denied or Excepted Code Table for
expansion.
Selection
• Location number: 001 through 400
• Toll call number: 10 digits (max.)
Default
All locations — Not stored
Programming
1.
Enter 333.
Display: 333 TRS EXTRA -
2.
Press NEXT.
Display: Location NO?
3.
Enter a location number.
To enter location number 001, you can also press NEXT.
Display example: 001:Not Stored
4.
Enter a toll call number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new number.
5.
Press STORE.
6.
To program another location number, press NEXT or PREV, or SELECT and the desired
location number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
There is a maximum of either 420 toll call numbers for Denied Code Table or a maximum of
405 toll call numbers for Excepted Code Table. Each number has a maximum of ten digits,
consisting of 0 through 9, and . The character " " can be used as a wild card character.
Features Guide References
Toll Restriction
162
Programming Guide