Table 2-71 Cpu Reset Programs - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
ACD/MIS can connect to the Primary (Main) site only.

Only one Voice Mail can be installed in a NetLink network.

In-Mail and VRS use the VMDB of the Primary (Main) site.

APSU can be installed in the Secondary (Remote) System, however the NetLink time zone

follows the Primary (Main) System.
When installing a Secondary System in a Netlink network and the Secondary System has

CD-LCA blades installed, the CD-LCA blades will come online and assign ports before any
CD-DLCA blades are assigned.
Secondary systems must follow the primary CPU software settings for Mu-law/A-law within

the country where the primary system is located. SV8100 NetLink connections are only
supported within the same countries/areas. For example, the SV8100 can be connected via
NetLink between the US and Canada, however the SV8100 can not be connected via
NetLink with systems in other countries (e.g., Mexico or the U.K.).
Synchronous Ringing via NetLink is not supported.

Always connect to the Primary System when using PCPro.

When using K-CCIS – T1 in a Netlink system, the CCTA blade is only supported in the

primary system.
The following programs require a reset after making a change using PCPro, WebPro or

Handset programming:
With Version 4000 software, the failover process in a Netlink environment is improved.

When network communication is down, an alarm is sent to the Attendant terminal informing
of the communication error on the network. Improvements also allow for a defined number
of network outages per clock hour before failing over.
SV8100 NetLink

Table 2-71 CPU Reset Programs

Program
10-12-01 Handset, WebPro, PCPro
10-12-02 Handset, WebPro, PCPro
10-12-09 Handset, WebPro, PCPro
51-01-01 Handset, WebPro, PCPro
51-15 WebPro, Handset Programming
84-03-06 Handset, WebPro, PCPro
90-04 Handset Programming
90-58 Handset Programming
10-46-07 PcPro
84-23 Handset, WebPro, PCPro
When Changed Using
Issue 7.0
2 - 1325