Licensing - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

Enhancements

The NAPT feature requires a Version 3000 or higher system license in order to be activated.

A CD-CP00-US (CPU) can be upgrade to a Version 3000 or higher system software however, the

NAPT feature will not function unless a Version 3000 or higher system license is applied.

When upgrading to Version 3100 or higher software, four IP Terminal Basic licenses are provided. If

a system with Version 3000 (3.01 or lower) is upgraded to Version 3100 software, the system gains

four IP Terminal licenses as soon as it is upgraded.

With Version 4.0 or higher PcPro and Version 4000 or higher CPU software, system license

information is saved to the database.

Licenses are used to activate certain features and applications for the UNIVERGE SV8100. The

UNIVERGE SV8100 system provides the following licenses:

System Licenses:

System Capacity

Max Port – This licenses the system for up to 712 ports. (Requires 256 Port License and PZ-ME50-US).

256 Port – This licenses the system for up to 256 ports. (Requires PZ-ME50-US).

Failure to properly install and program ports higher than 64 (as described

below) can corrupt the SV8100 database.

If the PZ-ME50-US is not physically installed on the CD-CP00-US, do not

attempt to change the PCPro database configuration to indicate that the

PZ-ME50-US is installed on the CD-CP00-US, program ports 64 and

higher and then upload the PCPro configuration to the SV8100 system.

This process can corrupt the SV8100 database. Refer to the next bullet for

the proper installation/programming procedure.

To properly install and configure the PZ-ME50-US; first install the

PZ-ME50-US on the CD-CP00-US. To program the ports above 64 using

PCPro, perform a new download before attempting to program the ports.

Licensing

Show Quick Links

Table of Contents