NEC Univerge SV8100 Features And Specifications Manual page 843

UNIVERGE SV8100
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
10-03-16 ETU Setup – PRI Service Two B-
Channel Transfer
14-01-13 Basic Trunk Data Setup – Trunk-
to-Trunk Transfer
15-07-01 Programmable Function Keys
20-02-08 System Options for Multiline
Telephones – LCD Display
Holding Time
20-11-11 Class of Service Options (Hold/
Transfer Service) – Automatic
On-Hook Transfer
20-11-14 Class of Service Options (Hold/
Transfer Service) –
Trunk-to-Trunk Transfer
Restriction
ISDN Compatibility
Description/Comments
Turn On or Off the ability to use
the ISDN-PRI 2 B-Channel
Transfer service.
If DISA caller can place outgoing
calls through the system (refer to
Program 20-14 in the Electra Elite
IPK II Programming Manual),
Enable loop supervision for the
DISA trunk. If DISA caller cannot
use the system trunks for outgoing
calls, enter Disable.
Assign function to multiline
terminal line keys (Transfer = 06).
Determine the time a user display
shows Caller ID for a second
incoming call.
Turn Off or On an extension user
ability to use Automatic On-Hook
Transfer.
Turn Off or On the Trunk-to-Trunk
Transfer Restriction. If enabled,
Trunk-to-Trunk Transfer is
impossible.
Assigned Data
1
0 = Off

1 = On
(default = 0)
0 = Disable
1 = Enable
(default = 1)

Line Key 1~48
0~99 (Normal Function
Code 751 by default)

 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
0~64800 (seconds)
(default = 5 seconds)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
Issue 7.0
Level
2 3



2 - 815