NEC Univerge SV8100 Features And Specifications Manual page 368

Issue 7.0
The ITR-8R-1 Cordless IP DECT Terminal can only connect directly to the SV8100 and be

used as a stand alone terminal.
The ITR-8R-1 Cordless IP DECT Terminal can only be powered using a POE hub/switch or

POE injector.
Cordless terminals cannot receive voice announcements when idle.

The ITL-8R-1 DECT IP Cordless – cannot be connected with DT300 or DT700 terminals.

Battery Capacity is 910 mAh, 2.4V with a Talk Mode of 16 hours (typical) and a Standby

Mode of seven days (typical).
The battery can be hot swapped while on a call. The battery must be replaced with another

charged battery pack within 20 seconds, otherwise the connection is lost.
The handset has visual and audible indicators to warn of a low battery condition.

When a message is received, the message icon is displayed.

Synchronous Ringing does not apply to the cordless terminals.

A beep indicates when the cordless terminal receives off-hook ringing.

A spare battery is available as an Optional Available Part. A second battery is not shipped

with the product.
The battery can be charged when it is installed in the handset or in the base charging unit

and the handset is in the charger. A stand-alone battery charger is not available.
Environments with many metal parts, metal shelves, or metal buildings are known to reduce

telephone performance.
When multiple cordless telephones are used in your office, they must operate on different

channels and be at least 20 feet apart (including the base unit and the telephones).
term
D cordless and DECT telephones do not ring when receiving a doorbox call. Notification

is shown in the display.
term
D cordless and Cordless DECT telephones can activate the door strike relay using a

Recall key assigned in the phone configuration or, by a Flash Key assigned to one of the
line keys in Program 15-07 (751: 62) (Version 4000 or higher software is required).
Under certain conditions, HOLD and TRANSFER have the same behavior. To prevent an

unwanted transfer after placing a call on hold and calling another user, the Line Key for the
call on hold must be pressed to retrieve the call from hold, otherwise the call is transferred
when the Cordless Terminal is placed in idle.
term
D Cordless telephones do not support the Caller ID List feature.

The DTL-8R-1 DECT Cordless – only supports connection with DT300 terminals.

DTH-4R-1/2 Cordless – only supports connection with Series i terminals (DTH/DTR).

DTR-4R-1/2 Cordless – only supports connection with Series i terminals (DTH/DTR).

2 - 340
UNIVERGE SV8100
Cordless DECT Terminals