Table 2-7 Firmware Compatibility Matrix - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Terminal xxx I xx or lower
Lot
(Version 8.10 and 1, E0 or lower)
Number
xxxJxx or higher
DT-330
(Version 2.20 or higher)
BCH Support may differ based on terminal firmware. To verify both DT-330 terminal and BCH-L Unit firmware, hold

down keypad buttons 1, 2 and 3 while plugging the line cord into the terminal.
Related Features
Electra Elite IPK Terminals
SV8100/SV8300 Terminals
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
10-03-03 ETU Setup (LCA PKG Setup) –
Transmit Gain Level (S-Level)
10-03-04 ETU Setup (LCA PKG Setup) –
Receive Gain Level (R-Level)
Ancillary Device Connection

Table 2-7 Firmware Compatibility Matrix

Description/Comments
Customize the transmit and
receive levels of the CODEC Gain
Types for 500/2500 type single
line telephones.
Customize the transmit and
receive levels of the CODEC Gain
Types for 500/2500 type single
line telephones.
BCH-L Unit Lot Number
xxxDxx or lower
Supported
Not supported
Assigned Data
1~63 (-15.5 +15.5dB)
[default = 32 (0dB)]
1~63 (-15.5 +15.5dB)
[default = 32 (0dB)]
Issue 7.0
xxxExx or higher
Supported
Supported
Level
1 2 3


2 - 53